Chào mừng đến với sieuthietbi.vn, Đăng Ký | Đăng Nhập
Giới Thiệu | Lợi Ích | Quảng Cáo | Liên Hệ
 
Nâng cao
Trang chủ >Thiết bị Đo - Cân > THIẾT BỊ PHÂN TÍCH VẬT LIỆU ĐỘC HẠI
Balô - túi xách - nón bảo hiểm

THIẾT BỊ PHÂN TÍCH VẬT LIỆU ĐỘC HẠI

THIẾT BỊ PHÂN TÍCH VẬT LIỆU ĐỘC HẠI
Website cho thành viên: http://sieuthietbi.vn/stb3467 (Phiên bản thử nghiệm: "Một thành viên, một webiste")
Tên Thiết Bị :

THIẾT BỊ PHÂN TÍCH VẬT LIỆU ĐỘC HẠI


Danh Mục : Thiết bị Đo - Cân
Giá :

Liên hệ nhà cung cấp


CÔNG TY CỔ PHẦN XUẤT NHẬP KHẨU VẬT TƯ KỸ THUẬT


Logo CÔNG TY CỔ PHẦN XUẤT NHẬP KHẨU VẬT TƯ KỸ THUẬT

Địa Chỉ : Số 157 Phố Láng Hạ - Quận Đống Đa - Hà Nội - Việt nam
Tel :

04 35620516/ext 19 or 0936.366.216


Fax :

04 38532511


Skype :

Skype status


Y!M :

Yahoo status


Mô tả thiết bị :

X-Ray Coating thickness gauge/Hazardous materials analyzer iEDX-200AT What is X-ray coating thickness gauge? Because the amount of energy discharged when X-ray is radiated on coating part has interrelation with material’s thickness, The thickness is measured by using the below material’s fluorescent X-ray excited or absorbed at the below material and coating Thickness. X-ray fluorescence of coating layer, Fluorescent X-rays detected at the bottom of the metal is a principle. Technical specification Measurement Methods Energy Dispersive X-ray Analysis Sample type MultiLayer, Solid/Liquid/Powder X-ray Tube W Target 50kVp, 1mA Filter 5 Filter Auto Change Detection System SDD(Silicon Drift Detector), Si-Pin Diode(Peltier System) Energy Resolution 135 eV FWHM at Mn Kα Detection Element Na(11) ~ U(92) Measurement Area 0.1, 0.2, 0.4, 0.5, 1 mm Analyze Method FP/Calibration Curve , Absorption, Fluorescence Stage monitoring 2stage CCD Camera Control System Desk-Top, Notebook, USB interface Sample Measuring Area 500 X 470 X 200 mm (W x D x H), wide PCB support Sample Moving Distance 200 X 200 X 150 mm (X x Y x Z), wide PCB support Size 500 X 700 X 570 mm (W x D x H) Power 110/220 VAC 50~60Hz Weight 85Kg(NET) Product charachteristics It is unified product, which can measure coating thickness, analyzes hazardous material, and analyzes heavy metal. Non-Destructive/non-contact coating thickness measuring by using X-ray Various products measuring - analyze single coating, double coating, alloy coating, and coating liquid Through the function controlling auto-beam axis, perfectly match camera position with measuring point Automatic stage arrangement function Application fields Fields requesting / Non-Destructive test Automotive parts, electronic circuit board, electronic connector, and mobile phone & IT product Maintain accurate content in measuring high price coating thickness Measure coating thickness of precious metals Product research, product development, and quality control iEDX-200AT Application-Reports SẢN PHẨM V.I.P CÙNG NHÓM Kẹp gắp Quả cân chuẩn Điện cực Thiết bị thí nghiệm - Dispenser Máy Đo pH TỦ MÔI TRƯỜNG DỤNG CỤ THÍ NGHIỆM NỒI HẤP TIỆT TRÙNG STURDY MÁY ĐO pH DÙNG CHO THỰC PHẨM MÁY ĐO ĐỘ DÀY Máy đo độ dai SD-700

Giới thiệu Doanh Nghiệp :

IMR là công ty hàng đầu chuyên sản xuất các loại thiết bị phân tích khí cháy, có trụ sở tại Florida, Mỹ. Các sản phầm bao gồm: thiết bị phân tích khí cháy, khí lò, khí nhiên liệu, và khí thải. Sensor đo khí: O2 Oxygen - CO Carbon monoxide - NOx Nitric oxide - NO2 Nitric dioxide - SO2 Sulfur dioxide - H2S Hydrogen Sulfide - HC Hydrocarbons - HCl Hydrogen Chloride - NH3 Ammonia - Cl2 Chlorine - O3 Ozone - H2 HydrogenCarbon dioxide - CH4 Methane Thông số: Co2 carbon dioxide, combustion efficiency, combustion losses, excess air
LIÊN HỆ NHÀ CUNG CẤP

NGƯỜI LIÊN HỆ



Validate Images

Thiết bị liên quan