Bông cách nhiệt DRAGON ROCKWOOL ống
CÔNG TY TNHH SẢN XUẤT & THƯƠNG MẠI VẬT LIỆU CHỊU LỬA LÊ VỸ
Tel :
(08) 5447.5447 Hotline: 0937.664.880 - 0908.604.608 - 0908.374.413 - 0979.385.485
Fax :
(08) 3597.4697
Mô tả thiết bị :
Bông cách nhiệt DRAGON ROCKWOOL ống cứng định hình không compsite. Các ống định hình rất dễ sử dụng và phù hợp với các tiêu chuẩn ống thép. Các ống định hìnhDRAGON ROCKWOOL có nhiều loại khác nhau tùy thuộc vào độ dày, kích cở ống, có lớp giấy hoặc lớp giấy nhôm.
ỨNG DỤNG
Bông DRAGON ROCKWOOL dạng ống định hình được sử dụng như vật liệu cách âm, cách nhiệt và chống cháy trong công nghiệp hóa dầu, hóa thực phẩm, nhà máy nhiệt điện, thiết bị nhiệt, hệ thống lò hơi công nghiệp.
THÂN THIỆN MÔI TRƯỜNG
Bông DRAGON ROCKWOOL dạng ống định hình là sản phẩm thân thiện môi trường, không chứa chất CFC, HCFC và amiang.
BẢO QUẢN
Bông DRAGON ROCKWOOL dạng ống địn hình là vật liệu nhẹ và có thể dễ dàng cắt gọt,… Để có thể bảo quản trong thời gian dài, chúng ta nên để chúng kho hoặc ở những nơi khô ráo.
CÁCH ÂM – THẨM ÂM
DRAGON ROCKWOOL được sử dụng hiệu quả trong cách âm và thẩm âm, dựa trên cấu trúc của sợi.
Physical Properties
Nomal Density (kg/m3) | 120-130 | |||
Service Temperature | Up to 6500C | |||
Thickness (mm) | 25, 30, 40, 50, 75, 100 | |||
Length(mm) | 1,000 | |||
Nominal Pipe Size | NPS(inch) | ID(mm) | NPS (inch) | ID(mm) |
1/2 | 22 | 5 | 140 | |
3/4 | 27 | 6 | 165 | |
1 | 34 | 8 | 216 | |
1-1/4 | 43 | 10 | 276 | |
1-1/2 | 49 | 12 | 319 | |
2 | 61 | 14 | 356 | |
2-1/2 | 76 | 16 | 406 | |
3 | 89 | 18 | 457 | |
3-1/2 | 102 | 20 | 508 | |
4 | 114 | - | - |
Thermal Conductivity: WW/n.K(kcal/m.h.0C) | Compresseive strengh | |
1000C | 0.04 | 10% compression > 20Kpa |
2000C | 0.06 |
|
3000C | 0.08 |
|
4000C | 0.1 |
|
- Other densities and sizes also are availablr on request
- Avaiblable thickness are not for all sizes, please consult before order.
- ASTM C411, hot surface performance in compliance with ASTM C612 (12000F) 6500C
HỆ SỐ TRUYỀN NHIỆT
Hệ số truyền nhiệt là một trong những nhân tố quan trọng của vật liệu cách nhiệt bởi vì nó đo được lượng nhiệt được truyền đi. Hệ số truyền nhiệt sản phẩm Dragon Rockwool được thể hiện cực tốt trong nhiệt độ cao bởi công nghệ.
DRAGON ROCKWOOL Pipe Section are strong, non - combustiable pre - formed insulation units. The section are supplied split and hinged for easy snap - on assembly. DRAGON ROCKWOOL are available in a number of insulation thinkness for a wide range of pipe outside diameter ( with facing of Kraft paper ) and Aluminium is available on request.
APPLICATION
DRAGON ROCKWOOL Pipe Section are specially manufactured to meet the specially requirements of the thermal insulation, fire protection and sound attenuation of pipework in chemical plants, petrochemical plants and power stations.
ENVIRONMENT
No CFCs or HCFC are used in the manufactures of DRAGON ROCKWOOL materials. DRAGON ROCKWOOL materials are free of asbestos.
HANDLING AND STORAGE
DRAGON ROCKWOOL Industrial Slabs are light and easy to cut to any shape with a sharp knife. For long-term protection they should be stored indoors or under a waterproof coverting.
ACOUSTICS
For environmental reasons, it is sometimes desirable to improve the acoustic insulation of pipe, especially those pipes in which gases, fluids or particle solids are transported at high velocities. The use of pipe section can considerably reduce noice emission from such soures.
To improve the noise reduction at low frequencies it is necessary to use a heavy cladding. The graph below gives an example of the sound reduction for an insulated pipe system with a lead cladding
Physical Properties
Nomal Density (kg/m3) | 120-130 | |||
Service Temperature | Up to 6500C | |||
Thickness (mm) | 25, 30, 40, 50, 75, 100 | |||
Length(mm) | 1,000 | |||
Nominal Pipe Size | NPS(inch) | ID(mm) | NPS (inch) | ID(mm) |
1/2 | 22 | 5 | 140 | |
3/4 | 27 | 6 | 165 | |
1 | 34 | 8 | 216 | |
1-1/4 | 43 | 10 | 276 | |
1-1/2 | 49 | 12 | 319 | |
2 | 61 | 14 | 356 | |
2-1/2 | 76 | 16 | 406 | |
3 | 89 | 18 | 457 | |
3-1/2 | 102 | 20 | 508 | |
4 | 114 | - | - |
Thermal Conductivity: WW/n.K(kcal/m.h.0C) | Compresseive strengh | |
1000C | 0.04 | 10% compression > 20Kpa |
2000C | 0.06 |
|
3000C | 0.08 |
|
4000C | 0.1 |
|
- Other densities and sizes also are availablr on request
- Avaiblable thickness are not for all sizes, please consult before order.
- ASTM C411, hot surface performance in compliance with ASTM C612 (12000F) 6500C
SURFACE TEMPERATURE TABLE
The thermal conductivity is the most important property of an insulation material, because it is a measure of the heat transfer. Products have an extremely high thermal performance due to the our technology in production process which gives them already a low thermal conductivity at low densitiles