Đặc Điểm Kỹ Thuật

Weight indicator in DIN box for panel mounting. Dimensions:  72 x 144 x 170
mm (depth of embedding including serial cable wiring and terminal boards).
Drilling template 67 x 139 mm. Five-digit semialphanumeric display (20
mm h), 7 segment LED. Five-key polycarbonate keyboard. IP54 front panel
protection.
Desk version: 189 x 135 x 59 mm (l x d x h) dimensions. 230VAC /15VDC
external supply included.

Main Funtions
 4 set-points confi  gurable as normally open or normally closed. The operator
can decide the setpoints activation for the net weight value, gross weight
value, or according to the peak value, otherwise for positive weights or for
positive and negative weights.
 Calibration (from keyboard) is protected through seals for the access to a
setting jumper or installer password.
 Semi-automatic zero and tare, predetermined tare funcions.
 Reference Menu of metrological parameters.
 Weight subdivisions displaying (1/10 e).
 0 - 3 Decimals.
 Multirange function.
 The following values can be printed from external contact: net/gross weight;
tare; predetermined tare; peak; date; time; print code (5 digit); ID code (only
if the Alibi memory is enabled).
RS232 SERIAL OUTPUT (COM1) :
uitable for connection to PC (Communication Protocols : Laumas or ModBus
RTU) / REMOTE DISPLAY (pages 186-187) / PRINTER (pages 189-190) /
RD data recorder (page 188).
RS422 / 485 SERIAL OUTPUT (COM2) :
 suitable to connect max 32 indicators to a PC / PLC by the Communication
Protocol (Laumas or ModBus RTU or Profi  bus DP).
 for REMOTE DISPLAY connection (pages 186-187).
ANALOG OUTPUT  (16bit - 65536 divisions):
Full scale settable by keyboard between 10 and 100% of the range (16 bit  
65536 div.)
The operator can decide the analog output activation for the net weight value
or gross weight.